need IC piping and exhuast

[matimus]

I'm looking for a place in edmonton to do my 3" IC piping and 3-3.5" stainless exhuast. it will have to be completly custom.
it will be ready for this in 3 weeks so im researching now.

thanks,
///MAT

[Disturbo]

Re: need IC piping and exhuast

3'' ic is too big. use 2 1/2 ic piping and 3" exhaust will flow over 500hp.

[matimus]

Re: need IC piping and exhuast

no its not. not anymore.

[nimbusgti]

Re: need IC piping and exhuast

What turbo are you running? GT42 with 3 inch comp outlet?

[matimus]

Re: need IC piping and exhuast

NO one knows anything????

[Kor]

Re: need IC piping and exhuast

I don't know but I agree with the poster who said you should stick to 2.5" IC piping and 3" exhaust unless you are building some kind of monster.

[nimbusgti]

Re: need IC piping and exhuast

I have a pretty good idea. I have been following your build thread on another forum. I thought you may have switched it up to a 42R if you want 3 inch boost pipes. It looks like you might be able to make it on the top 10 list of fastest imports this year.

[matimus]

Re: need IC piping and exhuast

my intercooler is 12x24x4" with 3" inlet and outlet so im using 3" IC pipes!
and yes it will be going for more power just not this summer.
yes thats the setup i have and stock ECU for tuning!!!!!

anything else you guys want to know or add or can we get back to the original Topic!!!

where to get 3" aluminum IC piping and 3-3.5" SS exhuast piping done in the city of edmonton.

thank you

[matimus]

Re: need IC piping and exhuast

I have a pretty good idea. I have been following your build thread on another forum. I thought you may have switched it up to a 42R if you want 3 inch boost pipes. It looks like you might be able to make it on the top 10 list of fastest imports this year.

i dont know about that, but i will tune for a steady reliable 20psi this summer and history shows that a setup similar to mine minus the water/meth inj. at 20psi shouild yeild 550-560whp.
the plan is to upgrade next winter to a gt40 or 42 but i see no sense in doing the IC pipe and exhuast twice.

EDIT: anyone know much about AFI?

[nimbusgti]

Re: need IC piping and exhuast

I have heard that the fabricator is really good. But i haven't heard good things about the shop in general. If you had no trouble building the manifold why don't you just tack the pipes together than have them welded at a welding shop?

[matimus]

Re: need IC piping and exhuast

I have heard that the fabricator is really good. But i haven't heard good things about the shop in general. If you had no trouble building the manifold why don't you just tack the pipes together than have them welded at a welding shop?

ive considered that option. but I still need the pipes and bends and such. I know you can get the bends at JB's but there way over priced.
Plus aluminum is an art to weld and i have little to no experience with it.

well, im gonna try anyway.
thanks,
///MAT

[nimbusgti]

Re: need IC piping and exhuast

Try mopac for better price on the pipes and bends.

[Dubsport Inc]

Re: need IC piping and exhuast

Thanks for helping Mat out Lanny.
Richard
P.S. Lanny is an incredible source of knowledge when it comes to turbo's and fueling.