If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
There is a set of Axis Se7en mods for sale on beyond, gimme a sec and I'll post up the link. I think they are like offset +42 or something so you should probably run some 10mm up front with maybe some bigger ones on the rear to push them out.
yes, you can run 42mm with spacers (10 mil will get you a 32 offset), the one drawback is you will lose some lip on the outside (especially if you got the ones nismo posted up because they are only 7.5" wide). Also, I think unless you get them for a REALLY good deal it's not worth it because you will have to buy bolts and spacers which will add a few hundred to the cost, and it's always nicer to have wheels that "just fit" without monkeying around. The one exception is running Porsche or Benz wheels where adapters are required, I have no regrets on that.
Comment