Spring install day

[Aleks]

Re: Spring install day

The box said 55/40, and it was all packaged up.........Mine and jeff's springs were both marked differently, and he got the 35 kit from QMR.....anyone know what the springs ID number was for the 55 kit??? Mine said 42/2, and Jeff's said 42

[Simon]

Re: Spring install day

The box said 55/40, and it was all packaged up.........Mine and jeff's springs were both marked differently, and he got the 35 kit from QMR.....anyone know what the springs ID number was for the 55 kit??? Mine said 42/2, and Jeff's said 42

how many finger gap do you have??

[Silverstoned]

Re: Spring install day

how many finger gap do you have??

Things haven't changed much in the last few days. I'm still at 1 finger gap for the front wheels, 2 finger gap for rear wheels. I'll snap a few pics as soon as I get a chance and post them up.

Jeff

[Aleks]

Re: Spring install day

I can squeeze two in the front....

[Simon]

Re: Spring install day

I can squeeze two in the front....

well if your 55 kit is higher than his 35 kit, then there's a problem.

[Aleks]

Re: Spring install day

He's also a VR.....I'm going to check with C1, and if in fact I do have the wrong kit, they will be changing it at their cost (especially after 3 months of waiting..)

[Silverstoned]

Re: Spring install day

So things have settle a little further, and I have exactly 35mm in the front, 40 in the rear. This is a change from stock VR6 height, with the sport package. Too bad they didn't make a 25/40 kit. Been awfully busy this week, but will try to get the car washed up for some pics in the next few days.

Jeff

[Aleks]

Re: Spring install day

I'll go measure mine today....

EDIT: I measured, the front hasn't settled at all! In fact is was almost a bit higher than before.....Anyhow, the back is 43mm lower, the front is only 30mm lower ( ! ), so I'm not out to lunch, it should be a bit lower.....The back settled almost a centimeter from install time....In fact now that I see what it measures out to I'm kinda pissed....I called C1, and they said come down and they'll measure it and what not, so I hope they'll take the good customer service route and replace it for me if its incorrect.....this bites...