Announcement

Collapse
No announcement yet.

Mk4 strut mount problem....

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Mk4 strut mount problem....

    So I installed a Bilstein / H&R setup in my Jetta about 8 months ago. When I did my install I put in all new hardware (Bolts, caps, bushings and bearings) I ran the VR setup as I thought it would put up with the abuse a bit better. While I was doing the install I did a full cleaning of the wheel wells and there was no rust. I also Armor Coated the wheel well also. Being new to Alberta and learning how shifty the roads are I am re thinking my setup!!

    Which checking my fluids and replacing a fuse from my stereo I noticed this!!!!




    So what are you thoughts? Both sides did the same thing the bushings are OEM ones from the dealer. Call it a fluke or a failed part???
    Tags: None
  • #2
    Re: Mk4 strut mount problem....

    I had similar when I first lowered my Mkiv Golf...if its not centered perfectly, it will punch up through one side of the strut tower.
    Hers 2009 Audi A4 6sp manual
    Mine....2005 Golf TDI, VNT 17, Malone tuned stage 4, Spec stage 2 clutch, FMIC, Ventectomy, NewSouth gauges, BuzzKen 2.5 turbo back exhaust, Evolution Skidplate, Helix OEM Reps retrofitted with Morimoto Bixenon mini's, ST coils, colour matched Huffs. Frostheater

    Comment

    • #3
      Re: Mk4 strut mount problem....

      Strut tower looks like the top is bent out, or am I seeing things?
      Ben
      2016 Ram 3500 Laramie
      2000 Jetta TDi, Dead and removing parts
      2005 Passat Wagon TDi, 310,000 km's and counting, BSM delete done....Trans died going to replace
      Her's
      2016 Toyota Highlander XLE Pearl White

      Comment

      • #4
        Re: Mk4 strut mount problem....

        Tower is definitely bent out, are you sure you installed the bushing the correct way? There is also no difference between the mk4 suspension accessory kits (bushing/bearing) AFAIK only thing different is the OEM spring rates and heights.

        Comment

        • #5
          Re: Mk4 strut mount problem....

          If it's on both sides, I doubt it's a coincidence. Probably time to take that apart to see what happened. If that goes anymore through you may end up with a hole in your hood.

          Comment

          • #6
            Re: Mk4 strut mount problem....

            It really really looks like you put them in upside down, that metal guiding ring flares out on the bottom side (bearing side) as shown here:

            Comment

            • #7
              Re: Mk4 strut mount problem....

              ^that is what I think too, the mounts should be able to self center if they're installed the right side up.
              Current Fleet
              #ProjectICreate Jetta GLI32
              2001 Cobra #88/3786
              1989 Jetta Trophy 1 of 500
              2004 Audi A2 FSI Colour Storm RHD
              2015 B8.5 S4 Sepang/Technik/6MT/SD/AAD/CF

              Motorsport Engineer

              Comment

              • #8
                Re: Mk4 strut mount problem....

                Now that I see the picture of the mount I think you guy's are correct they do look to be installed backwards. I remember when I did the install I mirrored what was in there before :(

                Looks like I will be buying more tools and tackling this job asap!! Will post up pictures of my screw-up lol

                Comment

                • #9
                  Re: Mk4 strut mount problem....

                  Its pretty easy to do...I'll give you a hand if you want. Just name a day and time.
                  Hers 2009 Audi A4 6sp manual
                  Mine....2005 Golf TDI, VNT 17, Malone tuned stage 4, Spec stage 2 clutch, FMIC, Ventectomy, NewSouth gauges, BuzzKen 2.5 turbo back exhaust, Evolution Skidplate, Helix OEM Reps retrofitted with Morimoto Bixenon mini's, ST coils, colour matched Huffs. Frostheater

                  Comment

                  • #10
                    Re: Mk4 strut mount problem....

                    Thanks for the offer Geobmx4life, I agree its a easy task to do tools and shop space are my issue as my box is still in BC :( If I don't get it done this weekend ill be in touch

                    Gives me a excuse to buy more tools maybe?

                    Comment

                    • #11
                      Re: Mk4 strut mount problem....

                      OK sounds good...
                      Hers 2009 Audi A4 6sp manual
                      Mine....2005 Golf TDI, VNT 17, Malone tuned stage 4, Spec stage 2 clutch, FMIC, Ventectomy, NewSouth gauges, BuzzKen 2.5 turbo back exhaust, Evolution Skidplate, Helix OEM Reps retrofitted with Morimoto Bixenon mini's, ST coils, colour matched Huffs. Frostheater

                      Comment

                      • #12
                        Re: Mk4 strut mount problem....

                        Well got the time and tools and did the bushings and bearings tonight.

                        You guys were correct, installed backwards lol Thank you guys for all your help and generous offers of help.

                        Comment

                        • #13
                          Re: Mk4 strut mount problem....

                          Glad you got it figured out...you'll probably notice a quieter ride now too...enjoy!
                          Geo
                          Hers 2009 Audi A4 6sp manual
                          Mine....2005 Golf TDI, VNT 17, Malone tuned stage 4, Spec stage 2 clutch, FMIC, Ventectomy, NewSouth gauges, BuzzKen 2.5 turbo back exhaust, Evolution Skidplate, Helix OEM Reps retrofitted with Morimoto Bixenon mini's, ST coils, colour matched Huffs. Frostheater

                          Comment

                          • #14
                            Re: Mk4 strut mount problem....

                            Originally posted by Geobmx4life View Post
                            Glad you got it figured out...you'll probably notice a quieter ride now too...enjoy!
                            Geo
                            Odd thing is that it was pretty quiet no real noise. Only difference now is that my car is sitting higher :(

                            Comment

                            • #15
                              Re: Mk4 strut mount problem....

                              And the ride should be smoother and tighter
                              Last edited by witchcraftz; 08-24-2014, 11:49 AM.

                              Comment

                              Previous template Next
                              Working...
                              X