Announcement

Collapse
No announcement yet.

help needed

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • help needed

    I need someone to help me with a problem of boost pressure. I need to borrow someones diverter valve. even if it is just for 5 minutes to screw it on drive car and take it off again. basically its like this.

    car drives fine until about 18psi and then it starts doing something really wierd. can't even really explain it. just like rapidfire boost pressure beign lost. I want to narrow down what it is. Anyone in the Rocky Ridge/Royal Oak area that would like to lend it to me?
    Last edited by seanfournier; 03-21-2004, 02:38 PM.

  • #2
    Re: help needed

    Originally posted by seanfournier
    I need someone to help me with a problem of boost pressure. I need to borrow someones diverter valve. even if it is just for 5 minutes to screw it on drive car and take it off again. basically its like this.

    car drives fine until about 18psi and then it starts doing something really wierd. can't even really explain it. just like rapidfire boost pressure beign lost. I want to narrow down what it is. Anyone in the Rocky Ridge/Royal Oak area that would like to lend it to me?
    I have an extra 710N bosch DV, you can borrow it as long as you need it... I am a *long* way from Rocky Ridge, but if none of the NW guys have one, just send me a PM and we can meet up sometime this week? I am at the Univ every day so thats not too far from RR.

    Edit: Not sure that the stock valves can take 18+ psi though.
    Last edited by Kor; 03-21-2004, 02:44 PM.
    KR
    Porsche 991 Carrera S

    Comment


    • #3
      Re: help needed

      Originally posted by seanfournier
      I need someone to help me with a problem of boost pressure. I need to borrow someones diverter valve. even if it is just for 5 minutes to screw it on drive car and take it off again. basically its like this.

      car drives fine until about 18psi and then it starts doing something really wierd. can't even really explain it. just like rapidfire boost pressure beign lost. I want to narrow down what it is. Anyone in the Rocky Ridge/Royal Oak area that would like to lend it to me?
      I'm in the Ridge. Which DV do you want to try? I've got the stock one sitting in the garage. Forge is on my car now, but seeing as it only takes a few minutes to change out you can try it out if you want.
      Last edited by 1.8Trip; 03-21-2004, 02:44 PM.
      Neil
      '03 Silver Jetta 1.8T - gone, but not forgotten


      mods to my car

      Comment


      • #4
        Re: help needed

        Originally posted by 1.8Trip
        I'm in the Ridge. Which DV do you want to try? I've got the stock one sitting in the garage. Forge is on my car now, but seeing as it only takes a few minutes to change out you can try it out if you want.
        I'd love to try the stock one as long as you knew it was still good. PM me with your address and I'll come borrow it for a couple hours. I'm thinking maybe also it could be my N75 since that is what controls boost. Maybe try swaping the n75 if the DV is not the cause?

        Comment


        • #5
          Re: help needed

          Check yer pm.
          Neil
          '03 Silver Jetta 1.8T - gone, but not forgotten


          mods to my car

          Comment


          • #6
            Re: help needed

            NWgangstas showin da love

            Comment

            Working...
            X