If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Try putting the car into gear with the engine off, hold the clutch and start it. Make sure that theres nothing in front of you incase the car lurches forward
Pat
His
1989 Porsche Carrera 4 // 5 Speed // Guards Red
Ben
2016 Ram 3500 Laramie
2000 Jetta TDi, Dead and removing parts
2005 Passat Wagon TDi, 310,000 km's and counting, BSM delete done....Trans died going to replace
Her's
2016 Toyota Highlander XLE Pearl White
So grinding happens with or without clutch engagement and the car can shift gears, but now does not move correct?
Ben
2016 Ram 3500 Laramie
2000 Jetta TDi, Dead and removing parts
2005 Passat Wagon TDi, 310,000 km's and counting, BSM delete done....Trans died going to replace
Her's
2016 Toyota Highlander XLE Pearl White
Its a clutch problem, my guess is the flywheel due to the noise on when ever the engine is running. One more test, can you change gears or even just get it out of gear with the engine running and not engaging the clutch? If you can the engine and transmission and not connected and your best to start by pulling the transmission. In 2 hours you could probably know what's wrong if you have an idea what you are doing.
Ben
2016 Ram 3500 Laramie
2000 Jetta TDi, Dead and removing parts
2005 Passat Wagon TDi, 310,000 km's and counting, BSM delete done....Trans died going to replace
Her's
2016 Toyota Highlander XLE Pearl White
Comment