Announcement

Collapse
No announcement yet.

mk4 stance/coilover/fitted help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Re: mk4 stance/coilover/fitted help

    I wouldn't recommend doing 10's in the front, you would need 12mm spacers in the front and still it would poke too much unless you were on air. With just a coilover they will rub on bumps like a mother

    Comment


    • #17
      Re: mk4 stance/coilover/fitted help

      Ya definitely sticking to 8.5's for the front, pm me if anyone has anything for sale!

      Comment


      • #18
        Re: mk4 stance/coilover/fitted help

        Don't give up! You just need to find some 9-10in wide wheels with et20ish depending how wide you go, stretch a 215, roll the fenders and pull the liners and it'll work. Measure your stock rim to fender, then use this http://www.1010tires.com/wheeloffsetcalculator.asp

        Comment


        • #19
          Re: mk4 stance/coilover/fitted help

          The wheels I have ordered are 18X9 ET 25 front 18X10 ET 25 rear, with fender rolling(maybe some pulling) They will clear my coils and will require no spacers. so anything within that 22-25 ET should work on wheels that size.

          Comment


          • #20
            Re: mk4 stance/coilover/fitted help

            This guy was running 10's all the way around, for some reason I thought they were rs' but they are miros. Check it out. http://forums.vwvortex.com/showthrea...l-rocking-hard.
            http://forums.vwvortex.com/showthrea...x10-all-around.
            Eric
            2000 Volkswagen Jetta VR6 - Bagged
            1990 BMW 325IX- Daily

            Comment


            • #21
              Re: mk4 stance/coilover/fitted help

              Originally posted by GUTTERDUB View Post
              Don't give up! You just need to find some 9-10in wide wheels with et20ish depending how wide you go, stretch a 215, roll the fenders and pull the liners and it'll work. Measure your stock rim to fender, then use this http://www.1010tires.com/wheeloffsetcalculator.asp
              Thanks for the support! I may give this a try and see what happens, we will see..

              Originally posted by GUTTERDUB View Post
              The wheels I have ordered are 18X9 ET 25 front 18X10 ET 25 rear, with fender rolling(maybe some pulling) They will clear my coils and will require no spacers. so anything within that 22-25 ET should work on wheels that size.
              That sounds perfect man, I would like to see photos once it's on!

              Originally posted by GUTTERDUB View Post
              This guy was running 10's all the way around, for some reason I thought they were rs' but they are miros. Check it out. http://forums.vwvortex.com/showthrea...l-rocking-hard.
              http://forums.vwvortex.com/showthrea...x10-all-around.
              Yeah I posted that link at the beginning of the thread haha but yeah man that was the look I was going for but I'm just not sure if I'm still going to go through with it

              Comment


              • #22
                Re: mk4 stance/coilover/fitted help

                Opps sorry!
                Eric
                2000 Volkswagen Jetta VR6 - Bagged
                1990 BMW 325IX- Daily

                Comment

                Working...
                X