Help? Simple Single DIN Deck swap?

[MechEngg]

Re: Help? Simple Single DIN Deck swap?

I just would like to know if the adapter Is different with different pins. For the reason that I already have a harness that works for non-monsoon systems

[gheron]

Re: Help? Simple Single DIN Deck swap?

yes they are 2 different adapters

[MechEngg]

Re: Help? Simple Single DIN Deck swap?

Okay cool thanks! Ill go pick one up tonight since I'm doing the deck tomorrow

[Stonewall]

Re: Help? Simple Single DIN Deck swap?

Why do you need new adapters? He already had an aftermarket deck installed. Cut the clarion harness off the old vw interface harness and use it. Just look at which wires are marked as which on the clarion end and they should be about the same for the pioneer. Easy smeesy.

[Red90]

Re: Help? Simple Single DIN Deck swap?

Yep, he should already have the VW end... Unless.... The previous installer hacker in the wiring....

[cam_wmh]

Re: Help? Simple Single DIN Deck swap?

helluva hi-jack fellas.

so colin and i got the old deck out, had to pull the climatronic & as suspected its a mess. There was a crossover, splitter.. and 6 RCA ends, with my new deck only having 4. The amp is a 500 watt 6 channel, so instead of spending a full day on it, I'm taking it in. (unless one of you wanna do it for $$)

[Stonewall]

Re: Help? Simple Single DIN Deck swap?

So the old deck has a sub out. If the new deck doesn't it is no big deal. The amp should have an output channel. Just feed that into the sub rca input and use the internal crossover. As to what the crossover and splitter where behind the deck? no idea.