meth kit install help

[gheron]

alright guys, i got everything wierd up and tested and it all works the only thing thats holding me back is puting the nozel in the upper intercooler piping that goes to the TB, i have no idea how to go about it, any one on here runing water meth the can lend a hand it would be great

thanks
Jonathan

[BaggedGLI]

Re: meth kit install help

Either tap into the intercooler pipe or get the sandwich plate that goes between the throttle body and the intake manifold.

[GTI CANADIAN]

Re: meth kit install help

I don't know what size it is, or what your experience is with machining, but I would suspect you'll want to create a threaded hole. This is done by drilling a hole to a certain size (Depending on the tap) and then "Tapping" The hole; which is basically threading the tap into the hole, thus "Cutting" threads as it enters.


More then likely, I would suspect the nozzle to be a pipe thread (NPT) which is tapered slightly, to allow for a self sealing fit when you tighten it.

Pipe taps are labeled according to what the inside diameter of the pipe. A 1/8 pipe tap is about the size of a 3/8 regular tap.

I've got taps and drills at work, or you can get them at crappy tire. But first you should find out the thread on the nozzle. I'm betting it's 1/8NPT Just a guess though.

Also, if you drill into the pipe, you have metal chops inside of it, so you will need a way to evacuate them.

[Tiki]

Re: meth kit install help

He is trying to put it into the oem rubber hose, i would assume getting a small section of pvc or metal pipe and clamping it in between the oem hose and throttle giving like a inch extension you can mount the nozzle too.