Need to borrow: VR6 clutch alignment tool

[dubCanuck1]

Hi all,

Does someone have one? I could use it for a couple weeks.

Let me know.

Thanks.

[Benjamin]

Re: Need to borrow: VR6 clutch alignment tool

You just looking for the center pin to line up the disk?

If so, I used a 14 mm long socket on my TDi a few times to center the disc. Worked perfect every time thus far and all the clutches were the VR6 ones as well.

Ben

[dubCanuck1]

Re: Need to borrow: VR6 clutch alignment tool

Yeah. I'm putting the clutch and pressure plate on. Just need to make sure it's all lined up properly. So, a 14mm socket eh? I might have to try that.

[Benjamin]

Re: Need to borrow: VR6 clutch alignment tool

Has to be a deep socket though, done 3-4 clutches like. Just remember to leave the square end out in case its a little tough to get out.

[dubCanuck1]

Re: Need to borrow: VR6 clutch alignment tool

Cool. Will do.

Thanks.