OE Vented Fender liner

[RobG]

I got one for my Jetta, thought it was easier than hacking up a TT liner. Good for all the people with the side mount coolers. Not sure why the NA City Jetta get this one, might be the first part off of the city Jetta worth buying.

2008-2009 Jetta City Passenger Side Fender Liner (vented)
Part #: 1JM 809 962 A

[blackradon]

Re: OE Vented Fender liner

kool. How much?

[eldo]

Re: OE Vented Fender liner

i've run one on my car for a couple months now. logging with vag-com, it actually makes quite a difference?! yay.

[onepointeightdub]

Re: OE Vented Fender liner

kool. How much?

+1

[shconer]

Re: OE Vented Fender liner

I have been running mine for about 6 months. I don't think there is a IAT sensor after the IC.

[Kor]

Re: OE Vented Fender liner

We did the vent mod once on Bart's TDI and we did some serious scientific benchmarking and temp readings afterwards, and couldn't see any improvements :( But if its oem now on the City cars, then maybe there is some benefit.

[RobG]

Re: OE Vented Fender liner

They are $85, or $55, depending on who you get to get it from the dealership.

[Khyron]

Re: OE Vented Fender liner

Thx - I'm gonna pick one up as well!

[R_Ethug]

Re: OE Vented Fender liner

vent fenders ftw.. my s4 has two

[RobG]

Re: OE Vented Fender liner

VW put vented fender liners on most cars now, I wonder why they cheaped out on the MK4's

[Khyron]

Re: OE Vented Fender liner

Was a special order at South Centre so I said I'd get it later.

[RobG]

Re: OE Vented Fender liner

Northland has it in stock.

[SethOwen]

Re: OE Vented Fender liner

i'm interested as well! how easy of an install is it?

[MusicalGenius]

Re: OE Vented Fender liner

For a fender liner, about 16? screws, you need to remove the wheel in question. Probably 15 - 20 minute job if you aren't going like mad.

[RobG]

Re: OE Vented Fender liner

Install was simple, 10 screws. 10 min, no wheel removal required, just lift the car to access the screws.
There was 2 screws at the bottom that didn't line up with the the 2 screws in the GLI lip.