Tweet
Saw this in my latest European car. http://ezoildrain.com
Kinda neat
Sent from my iPad using Tapatalk HD
Kinda neat
Sent from my iPad using Tapatalk HD
-
-
Re: Easy oil plug
Looks cool...I'd be scared that the valve would open if I hit a big bump or something.2016 VW GTI (Stock)
2016 VW Jetta 1.4T (Stock)
1994 Audi UrS4 - BW S257 SX-E built engine on VEMs.
2001 Audi S4 - K04s, J-Fonz Tuned ( Gone! Dropped valve) -
-
Re: Easy oil plug
Yeah no thanks. It's not exactly hard to unscrew the bolt every few months.
Pat
His
1989 Porsche Carrera 4 // 5 Speed // Guards Red
Hers
1987 VW Cabriolet // 20VT // O2J // Recaros // Porsche Slate Grey // Ronal Turbos // FK Coilovers
2005 Porsche Cayenne S
Theirs
1977 VW Type 2 Westfalia
Gone
2004 Audi A4 1.8T // quattro // 6 Speed // Brilliant Red
Fully built 1.8T || AEB || Motoza tuned || ID1000 || S4 MAF || GT3076RComment
-
Re: Easy oil plug
It all depends on the Vehicle. I picked up a couple of these. On the audis it is not worth it at all, but on the Diesel Jeep it is perfect. I used to have to take down a heavy steel skid plate and even then oil would go everywhere. Now with the quick drain plug all I need to do an oil change is a rag. I don't even have to raise it off the ground. Just reach under push on a 10" piece of tubing flick the leaver and that is it. Since it is a top mount cartridge filter there is nothing else under the truck to do. Easiest oil change ever.Comment
-
Re: Easy oil plug
This is something some big fleets use on heavy trucks that i have come across. Has a better fail safe. Made by Femco
1- Remove the little brass cap.(which acts as a safe guard)
2- Thread on the hose and it acts on a little valve in the plug.
3- Drain the oil.
No mess and easy, it's a great system. Not sure if they make smaller for car.
Only downfall is when you don't have the hose, your forced to pull the plug.Last edited by Kane; 04-22-2014, 02:07 PM.2004 Jetta TDI Sport-Daily
2002 Jetta 1.8T(stg2)-Wifey
1983 RabbitLS- Dirty DieselComment
-
Re: Easy oil plug
I like the second one, seems to be lower profile, I think the first wouldn't fit when you have a skid plate.Comment
Comment