opinion needed

[kujiwara]

Re: opinion needed

From behind they almost look small haha. .

You'll be fine with a 10mm

[ToXicXxX]

Re: opinion needed

You'll be fine with a 10mm

You sure? A 15 rubbed hard.

[MechEngg]

Re: opinion needed

You'll be fine with a 10mm

How can you honestly tell from a picture??

The only way is to actually measure where it will end up around the whole fender and see if compressing the spring more will bring it into contact

[kujiwara]

Re: opinion needed

My wheel sat exactly like sat with a 5mm, changed to 17.5mm, doesn't rub at all, while my buddy rubs very hard with a 20mm on the same wheel and tire setup. 2.5mm can make a big difference. But yeah, definitely measure it, takes less time than posting a photo here, I would let it sit in at least 3mm if you drive hard.

[ToXicXxX]

Re: opinion needed

How can you honestly tell from a picture??

The only way is to actually measure where it will end up around the whole fender and see if compressing the spring more will bring it into contact

I may ask the shop to test fit 10's. I'm thinking a bit of camber would help and look good.

I am moving to M3 control arms soon, they will increase camber a bit on their own.