If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
That kind of damage is generally caused by a 5 to 2 downshift generally up hills at a higer rpm causing valve float and piston contact.Head will have to come off.
That kind of damage is generally caused by a 5 to 2 downshift generally up hills at a higer rpm causing valve float and piston contact.Head will have to come off.
I was doing 20km/hour in a residential area while making a turn and it started ticking, i pushed the clutch in and it sputtered out, so I coasted it to ryans house which was like 3 houses down and parked it at the end of his driveway. 2nd gear at about 1,200 rpm. I know how these engines go, I don't think it's pretty but I'm hoping.
So there is one section of the belt missing 13 teeth. Down the line, maybe 15-20 teeth down there is one individual one missing. Still waiting to get the belt fully out to see anything else.
Ouch! That really sucks Colin :( I'm sure you will re-build it and make it even better than before! Are you gonna do any headwork since it's going to need a rebuild anyway?
Comment