BlakMarketClash's TiAL S605 Thread

[R-Audi]

Re: BlakMarketClash's TiAL S605 Thread

I love to cheap out on methonal storage!

True, but I'd venture to say that 99% of these containers are produced by the same few factories, whether they are sold in Europe via that website, eBay or a local retailer. You only choose how much you pay!

[BlakMarketClash]

Re: BlakMarketClash's TiAL S605 Thread

True, but I'd venture to say that 99% of these containers are produced by the same few factories, whether they are sold in Europe via that website, eBay or a local retailer. You only choose how much you pay!

Absolutely
if i were starting a new, i would consider the gauge of the plastic walls, and the cap. For safety and performance reasons and it should work like a charm. I even seen guys weld custom plasctic boxes.

[BlakMarketClash]

Re: BlakMarketClash's TiAL S605 Thread

Revision 3. 21psi. Meth at early threshold. Not even close to final*

[BlakMarketClash]

Re: BlakMarketClash's TiAL S605 Thread

Got a file from EPL! Got a FATS time in the extreme rain up a slight slope. Still a bit too rich but it's getting there!

[BlakMarketClash]

Re: BlakMarketClash's TiAL S605 Thread

Hitting the dyno in the next few days. Dave@EPL just sent a new file! Going to put some miles/logs on it and then jump on the dyno. This car is responding very well, it definetly wasnt built on a friday I've been running a 3.2-3.3 consistent FATS, which is cool. Anybody in town here down for a split run or whatever PM!

[b spot]

Re: BlakMarketClash's TiAL S605 Thread

I ran into this car over the weekend. JEEEESSSSSSUUUUUSSSSSSSSS!!!!! Absolutely nuts. Next time I'm pulling over and asking for a ride

[BlakMarketClash]

Re: BlakMarketClash's TiAL S605 Thread

I ran into this car over the weekend. JEEEESSSSSSUUUUUSSSSSSSSS!!!!! Absolutely nuts. Next time I'm pulling over and asking for a ride

absolutely! bud, your car was mean as hell. sounded crazy good!!!

[b spot]

Re: BlakMarketClash's TiAL S605 Thread

Haha, when your buddy asked "What are you running?" I was kind of at a loss for an answer being my biggest mod is probably something you forgot you even did on your car. Have you run a 1/4 with it or anything? I don't think I've ever seen anything that fast before.

[BlakMarketClash]

Re: BlakMarketClash's TiAL S605 Thread

Haha, when your buddy asked "What are you running?" I was kind of at a loss for an answer being my biggest mod is probably something you forgot you even did on your car. Have you run a 1/4 with it or anything? I don't think I've ever seen anything that fast before.

Haha! Haven't takin it to the strip yet. I need to lock my axle/drivetrain down still with some bushings, and strip the interior in the back. We still need to tune it more, its hitting 26psi, and we are going to go to 28/or 30. This car has really surprised me, its like a freak car. My eyes literally go into the back of my head sometimes. Thanks for the kind words man, i still love your car!

[morris400]

Re: BlakMarketClash's TiAL S605 Thread

Haha! Haven't takin it to the strip yet. I need to lock my axle/drivetrain down still with some bushings, and strip the interior in the back. We still need to tune it more, its hitting 26psi, and we are going to go to 28/or 30. This car has really surprised me, its like a freak car. My eyes literally go into the back of my head sometimes. Thanks for the kind words man, i still love your car!

when it hit full boost i could not move, i was glued to the seat. car is fast as hell. ps thanks for the exhaust. i love it but hated installing it lol.

[BlakMarketClash]

Re: BlakMarketClash's TiAL S605 Thread

A minor setback...



Had the flywheel blow right off the endcrank. All 8 bolts sheered off! Because it happened under load, a chain reaction sent flames out the tailpipe that rivaled mortar fire!

Here is the picture of the carnage.


Back of the flywheel

[RONDAL]

Re: BlakMarketClash's TiAL S605 Thread

what was the cause of that? sheer torque or what?

[BlakMarketClash]

Re: BlakMarketClash's TiAL S605 Thread

They were all torqued to spec, which leads me to believe that the torque is what killed them. I shot some emails to Kevin@CM, doing my best to be polite. Now i got to break out my extractor kit out for all 8! lol

[BaggedGLI]

Re: BlakMarketClash's TiAL S605 Thread

Holy fu......!

[BlakMarketClash]

Re: BlakMarketClash's TiAL S605 Thread

^HAHA i know right???