If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
LOL, I'm sure Mark would be okay with that, but we would need to find a willing Lambo or Ferrarri, first. Those guys typically have nothing to gain by racing an Audi, but a lot of pride to lose...
Jordan
Jerbel Autowerks
Distributor of parts from:
JAW, 034 Motorsport, Power Up Lubricants and OEM replacement parts
(403) 690-7135 jordan@jerbelautowerks.com
LOL, I'm sure Mark would be okay with that, but we would need to find a willing Lambo or Ferrarri, first. Those guys typically have nothing to gain by racing an Audi, but a lot of pride to lose...
damn lambo's,
you went with side mount fmic's right? or one big front mount? does it still look stock? cuz if it does thats even better.
As for now I am just waiting to get my car back and get used to it and then I will be putting the 19's on. As for castrol it will be the same type of thing I have to get used to driving it before I will hit the track.
As for now I am just waiting to get my car back and get used to it and then I will be putting the 19's on. As for castrol it will be the same type of thing I have to get used to driving it before I will hit the track.
You might want to put some sheap tires on your car for the first while!! I know from experance with the Tial 605 car that we just finished that we are having a hard time keeping traction the car will break lose untuil 4 gear
I don't have them the guy that came down to do the tune has them on his computer. I am sure that I can get him to email them to me. How is your build coming along, are you still shoting for 25psi til red line?
I know as of now the boost level on the 605 is set at 21psi and as I recall the fat time was 3.9.
That would be great if you could get him to email them to you. I would be very interested to see the logs for comparison's sake.
The tune is nearing completion on this car. We had planned on running 24psi hold to redline, but will probably end up running 24psi taper to 21psi at redline, depending on how the ignition timing is affected, and which setup yields a stronger car.
Are you guys in Red Deer?
Jordan
Jerbel Autowerks
Distributor of parts from:
JAW, 034 Motorsport, Power Up Lubricants and OEM replacement parts
(403) 690-7135 jordan@jerbelautowerks.com
Ya we are in Red deer. What type of timing are you running and what is your goal? From what the guy that did our tune said we should be right at the 550whp what do you think the 650 car will be making?
Comment