Announcement

Collapse
No announcement yet.

2006 3.2 A3 Part-out - Lots of Aftermarket and OEM Parts!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 2006 3.2 A3 Part-out - Lots of Aftermarket and OEM Parts!

    Any parts can be delivered to Calgary on the April 23rd weekend!








    [IMG][/IMG]




    Part-out details:

    Please email jbrehm@gmail.com for parts inquiries. 2006 3.2 DSG Audi A3, Silver on black interior, approximately 110k miles. Car was hit in the front left corner, so bumper, headlight, and fender on that side are toast, but the rest of OEM parts are available. Mods not listed below are not for sale, but message for OEM parts not listed below.

    - Gen2 HPA Switchable Haldex Controller, with wireless remote - MSRP $1299USD - $750USD shipped
    - Magnaflow 15598 Catback - MSRP $867USD - $500USD
    - Passat spindles and control arms - $300USD
    - A3 spindles - $100USD
    - ECU UM tune, needs IMMO delete - $200USD
    - White B6/7 S4 seats with A3 wiring harnesses, good condition - $500USD
    - Catless OEM DPs with new flex pipes (done by exhaust shop) - $200USD
    - Unibrace XB-3 - $225USD
    - Refinished Aftermarket LED headlights - $200USD
    - New 3.2L Mishimoto rad - MSRP $340USD - $200USD
    - 3.2L crank, magnafluxed and balanced - $600USD
    - 3.2L unknown crank - $300USD
    - New ARP 3.2L main studs - $120USD
    - New Raceware 3.2L head studs -$275USD
    - Engine - $2000USD
    - Newer Left HID headlight, about 1000 miles on it - MSRP $1100CAD - $600CAD
    - Haldex and diff, fresh fluid and filter - $900USD
    - Rear axles - $100USD
    - MKV R32 head, with cams and adjusters, and valve cover, fresh deck - $700USD


    Sold:

    - Brembo 17Z BBK with Racing Brake 2-piece rotors and ET500 pads, 5000KM on it
    - DSG with UM tune
    - New DSG 19lb SMFW
    - Front axles
    - New 3.2L IE rods with ARP bolts
    - New Calico rod bearings
    - New Calico main bearings
    - New VR6 water pump
    - New VR6 MKV oil pump
    - New complete 3.2L timing kit
    - New 3.2L gasket kit - rear main, head, manifolds, everything
    - Engine block, magnafluxed, fresh deck, good to go
    - New Crack pipe and SAI blockoff
    Last edited by cheeba; 04-19-2016, 09:19 PM.
    Jeremy Brehm - Click the cars below for build threads!

    '02 Audi TT 225
    - 2930lbs - Built 2.0L - PTE 6262 - 30PSI - 10.0:1CR - 9000RPM (RIP :()

    '06 Audi A3 3.2Q

  • #2
    Re: 2006 3.2 A3 Part-out - Lots of Aftermarket and OEM Parts!

    Added 17Z Brembo BBK and can now deliver parts to Calgary for the April 23rd weekend!
    Jeremy Brehm - Click the cars below for build threads!

    '02 Audi TT 225
    - 2930lbs - Built 2.0L - PTE 6262 - 30PSI - 10.0:1CR - 9000RPM (RIP :()

    '06 Audi A3 3.2Q

    Comment


    • #3
      Re: 2006 3.2 A3 Part-out - Lots of Aftermarket and OEM Parts!

      Any chance you have a good arm rest/center console in black?
      Curtis.

      Comment


      • #4
        Re: 2006 3.2 A3 Part-out - Lots of Aftermarket and OEM Parts!

        Haha, nope. I could have sold about 20 of them by now, though. Mine is broken, like all the rest, but I was going to machine out a spot, then epoxy in some strong magnets to get rid of the 100% failure-rate latch...
        Jeremy Brehm - Click the cars below for build threads!

        '02 Audi TT 225
        - 2930lbs - Built 2.0L - PTE 6262 - 30PSI - 10.0:1CR - 9000RPM (RIP :()

        '06 Audi A3 3.2Q

        Comment


        • #5
          Re: 2006 3.2 A3 Part-out - Lots of Aftermarket and OEM Parts!

          Added a Gen2 Haldex controller!
          Jeremy Brehm - Click the cars below for build threads!

          '02 Audi TT 225
          - 2930lbs - Built 2.0L - PTE 6262 - 30PSI - 10.0:1CR - 9000RPM (RIP :()

          '06 Audi A3 3.2Q

          Comment

          Working...
          X