Tweet
I am clearing out parts that have been hanging around from form S4's and A6's, if you need something that is not listed "JUST ASK" I may have one
1. Bi-Pipes stock, 2 sets untapped, 1 set tapped for w/m bungs $25/set (sold)
2. Y-pipe, perfect for someone who wants to custom paint one while keeping their car running $40 (SOLD)
3. Fuel rail with pressure regulator and all evap check valves $30 each
4. Early style S4/A6 intake manifold, great core for enlarged plenum SRM or Project B5 built mani $45
5. 6 Siemens 630cc Injectors, use stock wire clips, tall injector, requires nut or washers as rail spacer $150/set lowered from 200
6. Bucketfull of stock injectors, all in working order $15/each
7. Motor, complete and running, began making bottom end bearing noise when oil was hot, good candidate for rods/bearings build, heads were decked 30k ago, all guides and retainers replaced, good cam adjusters. I can include brand new OEM springs and retainers for a full asking price offer $700 lowered from 850
8. Motor, incomplete internals, suffered piston melt on cylinder 5, slight damage to cylinder wall but is useable to bore to 2.8 or bore/stroke to 3.0, I can include 5 stock rods and pistons, as well as stock oil pump. Will include good heads with good cam adjusters $425 lowered from 500
9. Core Racing 18x7 Wheels, ET38, CB 66.6 includes metal hub rings to 57.1, I bead blasted them 2 years ago and resprayed with ceramic caliper paint (silver/blue) $200 lowered from 250
Best way to contact is through email mantis.technical@gmail.com
1. Bi-Pipes stock, 2 sets untapped, 1 set tapped for w/m bungs $25/set (sold)
2. Y-pipe, perfect for someone who wants to custom paint one while keeping their car running $40 (SOLD)
3. Fuel rail with pressure regulator and all evap check valves $30 each
4. Early style S4/A6 intake manifold, great core for enlarged plenum SRM or Project B5 built mani $45
5. 6 Siemens 630cc Injectors, use stock wire clips, tall injector, requires nut or washers as rail spacer $150/set lowered from 200
6. Bucketfull of stock injectors, all in working order $15/each
7. Motor, complete and running, began making bottom end bearing noise when oil was hot, good candidate for rods/bearings build, heads were decked 30k ago, all guides and retainers replaced, good cam adjusters. I can include brand new OEM springs and retainers for a full asking price offer $700 lowered from 850
8. Motor, incomplete internals, suffered piston melt on cylinder 5, slight damage to cylinder wall but is useable to bore to 2.8 or bore/stroke to 3.0, I can include 5 stock rods and pistons, as well as stock oil pump. Will include good heads with good cam adjusters $425 lowered from 500
9. Core Racing 18x7 Wheels, ET38, CB 66.6 includes metal hub rings to 57.1, I bead blasted them 2 years ago and resprayed with ceramic caliper paint (silver/blue) $200 lowered from 250
Best way to contact is through email mantis.technical@gmail.com
Comment