Tweet
FOR SALE: 1998 VOLKSWAGEN GTI VR6 (Black) Includes a rebuilt spare engine NEW PRICE: $5500.00 obo
ENGINE:
2.8L 6 cylinder 172HP 170FT/LBS Stock... modified to maybe 185HP now.
TRANSMISSION:
5spd manual FWD
KILOMETERS:
298,000KMS
FEATURES:
sunroof, Four wheel disc brakes, all leather interior, AC(blows cold), fog lights, GTI embrodered floor mats, 8-speaker stereo(factory), red stitched black leather parking brake handle, white faced gauges with orange needles, MFA display which includes; L/100kms mileage, outside temp, oil temp, etc.
UPGRADES:
Coil-over suspension
Cross-drilled and slotted front rotors
Brembo rear rotors w/ TRW pads(just installed today with new rear bearings)
17inch TSW crofts w/205/40R17(tires are good till the end of summer)
Magnaflow Catback with electronic valve exhaust dump
Neuspeed ECU chip
WRD front complete poly engine mount(rear and tranny are stock)
MOMO leather and suede steering wheel
MKIV shift knob
JVC head unit (nothing special) but has an AUX jack
Passat rear leather seat with headrests and an armrest for the passengers.
Cabrio interior chrome door release handles
Chrome dashboard vents
VR front splitter
RECENT REPAIRS
New rear TRW pads with Brembo rotors and new bearings
Front pads and rotors-1 year ago
Front wheel bearings OEM-1 year ago
new front control arm bushings left and right sides-1 year ago
coil pack OEM-2 years ago
clutch kit and flywheel OEM-2 years ago
front strut mounts and bearings OEM-4 months ago
new drivers side strut tower welded in-work done by Cosmos Collision centre- 6 months ago
Heater core OEM-2 years ago
Recharged AC-2 years ago
The "Bads":
-ABS light is on. easy fix but have to install a new reluctor wheel on the left front wheel hub for the speed sensor and the left rear as well.
-Check engine light is on ( its a VW..LOL) -but its because the MAF needs replacing and a vacuum hose for the combi valve for the secondary air injection..its hard to get at.
-12 inch crack on windsheild at the top and runs horizontally...not in drivers or passengers view.
-the butterfly valve on the exhaust dump is warped and doesn't seal properly...I just leave it open all the time. It sounds mean but can get droney inbetween 2200-2600rpms
-Rust in some spots..1)the rear hatch, 2) above the windsheild on the drivers side about 3 inches long X 1/2 inch wide
IF THE WHOLE ASKING PRICE IS MET, THEN I WILL FIX EVERYTHING BESIDES THE SPOTS OF RUST.
The "Goods"
-comes with the factory 15 inch alloys painted satin black with a season or two of winter rubber
-10 MM H&R hubcentric spacers for the rear wheels (winter wheels)
-An extra VR lip splitter
-Stck dual chamber headlights with HID's for the low beams. Just picked these up and are in like new condition. They are not installed but the FK aftermarket ones are.
-the deal comes with spare parts like; left and right cv shafts, spare newish coil pack, altenator, starter, oil cooler, a set of 6 OEM spare good fuel injectors and last but not least....
A newly rebuilt VR6 spare engine with a 268 cam and gasket matched head and freshly painted block in red. I was going to install this, this winter, but other plans have made this not a priority anymore.
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
This is the spare engine. I wish I had the time to install it and enjoy it before she goes away forever :(
Uploaded with ImageShack.us
Uploaded with ImageShack.us
ENGINE:
2.8L 6 cylinder 172HP 170FT/LBS Stock... modified to maybe 185HP now.
TRANSMISSION:
5spd manual FWD
KILOMETERS:
298,000KMS
FEATURES:
sunroof, Four wheel disc brakes, all leather interior, AC(blows cold), fog lights, GTI embrodered floor mats, 8-speaker stereo(factory), red stitched black leather parking brake handle, white faced gauges with orange needles, MFA display which includes; L/100kms mileage, outside temp, oil temp, etc.
UPGRADES:
Coil-over suspension
Cross-drilled and slotted front rotors
Brembo rear rotors w/ TRW pads(just installed today with new rear bearings)
17inch TSW crofts w/205/40R17(tires are good till the end of summer)
Magnaflow Catback with electronic valve exhaust dump
Neuspeed ECU chip
WRD front complete poly engine mount(rear and tranny are stock)
MOMO leather and suede steering wheel
MKIV shift knob
JVC head unit (nothing special) but has an AUX jack
Passat rear leather seat with headrests and an armrest for the passengers.
Cabrio interior chrome door release handles
Chrome dashboard vents
VR front splitter
RECENT REPAIRS
New rear TRW pads with Brembo rotors and new bearings
Front pads and rotors-1 year ago
Front wheel bearings OEM-1 year ago
new front control arm bushings left and right sides-1 year ago
coil pack OEM-2 years ago
clutch kit and flywheel OEM-2 years ago
front strut mounts and bearings OEM-4 months ago
new drivers side strut tower welded in-work done by Cosmos Collision centre- 6 months ago
Heater core OEM-2 years ago
Recharged AC-2 years ago
The "Bads":
-ABS light is on. easy fix but have to install a new reluctor wheel on the left front wheel hub for the speed sensor and the left rear as well.
-Check engine light is on ( its a VW..LOL) -but its because the MAF needs replacing and a vacuum hose for the combi valve for the secondary air injection..its hard to get at.
-12 inch crack on windsheild at the top and runs horizontally...not in drivers or passengers view.
-the butterfly valve on the exhaust dump is warped and doesn't seal properly...I just leave it open all the time. It sounds mean but can get droney inbetween 2200-2600rpms
-Rust in some spots..1)the rear hatch, 2) above the windsheild on the drivers side about 3 inches long X 1/2 inch wide
IF THE WHOLE ASKING PRICE IS MET, THEN I WILL FIX EVERYTHING BESIDES THE SPOTS OF RUST.
The "Goods"
-comes with the factory 15 inch alloys painted satin black with a season or two of winter rubber
-10 MM H&R hubcentric spacers for the rear wheels (winter wheels)
-An extra VR lip splitter
-Stck dual chamber headlights with HID's for the low beams. Just picked these up and are in like new condition. They are not installed but the FK aftermarket ones are.
-the deal comes with spare parts like; left and right cv shafts, spare newish coil pack, altenator, starter, oil cooler, a set of 6 OEM spare good fuel injectors and last but not least....
A newly rebuilt VR6 spare engine with a 268 cam and gasket matched head and freshly painted block in red. I was going to install this, this winter, but other plans have made this not a priority anymore.
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
This is the spare engine. I wish I had the time to install it and enjoy it before she goes away forever :(
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Comment